Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors Remove

Three seconds and the right viewing angle: how temperature checks actually get done

Published 20 November 2026 at 10:54

You are standing with the thermometer in one hand and a hot gastronorm container in the other. The display is upside down, steam settles on the glass and you have to turn the instrument around to read it. Or you wait half a minute for the probe to catch up. These are minor annoyances, but they mean temperature checks get postponed, done carelessly or skipped altogether.

ETI Thermometer TempTest® 1. Including permanently mounted penetration probe Ø3.3 x 80 mm. The display auto-rotates for easy reading. IP67. Measuring range -50 to 300°C. With calibration certificate and carrying case

What the TempTest 1 is

The ETI TempTest 1 is a handheld penetration thermometer with a permanently mounted stainless steel probe, Ø3.3 x 80 mm. The measuring range is -49.9 to 299.9 °C with a resolution of 0.1 °C and an accuracy of ±0.4 °C up to 199.9 °C. The probe has a fast-response tip and reaches the actual temperature in about three seconds.

What sets the instrument apart from a simple spot-check thermometer is the display. It rotates automatically in 90° steps, so the digits are always the right way up regardless of how you hold the thermometer. The function can be locked if you prefer a fixed orientation. The backlight only switches on when the lighting requires it. The housing is sealed to IP67 and has Biomaster antimicrobial protection against bacterial growth. The instrument complies with EN 13485 and is powered by two AAA batteries, with an expected battery life of at least 5,000 hours without backlight.

What problems it solves

Three things cause temperature checks to suffer: slow response, poor readability and instruments that cannot withstand the environment. All three are addressed here. Fast response means the check can be made at every point and not just when time allows. The rotating display lets you read the value with the probe in a pot, in a refrigerated display case or in a confined space. Being waterproof means you can rinse the instrument off instead of carefully wiping it.

Three use cases

In food production and commercial kitchens, core temperature is checked during cooking, hot holding and cooling. The probe reaches the center of the product, and the final value can be documented with the traceable calibration certificate that is included.

In sanitary installations and property maintenance, hot water temperatures are checked, for example in water heaters and at taps, where the limit values matter for health and energy reasons. The thermometer fits in a pocket and tolerates moisture.

In the manufacturing industry, it can be used to quickly check the temperature of coolant, washing baths or hydraulic oil in a tank. A deviating temperature is often the first sign of a problem with cooling or lubrication.

Why it pays for itself

A calibration certificate is included, which saves both purchasing hassle and time. The holster or wall mount that comes with it gives the instrument a fixed place, so it does not disappear between shifts. The automatic shut-off after ten minutes saves the batteries and can be switched off when needed. The most valuable thing, however, is what an early deviation costs: a discarded batch of food, faulty machining or a stoppage that could have been avoided. It is cheaper to measure often with an instrument that is easy to use.

If you want a thermometer that actually gets used in daily work, the TempTest 1 is worth a closer look.

Read more

More news

All news