Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frostVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frost

KIMAG-10 Measuring Loupe 10× with LED and 9 Scales: When the Operator Doesn’t Want to Switch Between Three Different Measuring Loupes for mm, Inches and Degrees on the Same Workpiece

Published July 9, 2026 at 14:00

A workshop QC bench often has 5-8 magnifiers next to the workpiece, all with different scales: 0.1 mm for length measurements, 0.05 mm for fine measurements, inch fractions for imported components, protractor scales for angle checks, chord gauges for radius checks. Switching between them is slow and risks the wrong magnifier being used for the wrong measurement. The KIMAG-10 with interchangeable scales solves this by letting ONE magnifier function as ALL of them — the same optics, different scales.

The optics itself

The base optics is built on the Peak Loupe 1983 (the most widely used measuring loupe in the Japanese quality industry). 10× magnification. Four lens elements in two groups. Achromatic correction (same focus for red and blue wavelengths). Anti-reflective coating on all surfaces for high transmission. Focusable for operator vision compensation. Working distance 30 mm.

The unique feature: the scale sits on an interchangeable glass plate ring that clips onto the top of the loupe’s focal plane. The ring is designed for tool-free quick-change. An operator can swap the scale in ~10 seconds.

The 9 included scales

The base assortment includes the scales that cover most workshop tasks:

  1. 0.1 mm graduation — standard length measurement.
  2. 0.05 mm graduation — fine measurement.
  3. 0.01 inch (0.254 mm) graduation — imported components with imperial tolerances.
  4. Angle measurement 0-360° with 1° graduation.
  5. Radius reference with concentric circles (0.5 mm, 1 mm, 2 mm, 5 mm, 10 mm radius).
  6. Chord gradient for direct measurement of chord lengths on circles.
  7. Thread count (threads per cm) — for textile or mesh inspection.
  8. Right-angle ruler grid for distance measurement in two dimensions.
  9. Diagonal scale for distances between non-orthogonal points.

The scales are etched in glass (the same technique as the Peak Loupe 1983) with a line thickness of 5-10 micrometers.

LED lighting: 8 LEDs in a ring

At 10× magnification, the workpiece often becomes too dark for clear reading under normal office lighting. The KIMAG-10 has a built-in LED ring with 8 white LEDs that illuminate the work area from all sides. The ring configuration provides even lighting without shadows from a single directional light.

Battery: standard AAA batteries (typically 3 pcs). Battery life 20-40 hours of continuous lighting. Carrying spare batteries in the tool bag is standard practice.

Practical consequence: the KIMAG-10 can be used in dark environments (electrical cabinet diagnostics, warehouse verification, maps in library archives) where a normal loupe would be unusable.

The 28 additional scales available for purchase

The KIMAG range includes a total of 14 black and 14 white interchangeable scales. The 28 beyond the 9 included cover more specialized applications:

  • Sub-millimeter measurements: 0.02 mm and 0.01 mm graduation for micrometer calibration verification.
  • Screw and thread graduation: Metric and Whitworth thread pitch.
  • Standard metric (M) angle graduation: For standardized cutting tools.
  • PCB trace graduation: 0.25 mm grid for printed circuit board analysis.
  • Photo graduation: 35 mm film frame verification.
  • Paper graduation: mesh count for sieves and printing paper.
  • Special industry graduations: e.g. optical tests, banknote verification.

KIMAG-10 mätlupp 10× med LED-belysning och 9 utbytbara skalor

Black vs. white scales — visual difference

Each scale is supplied in two variants: black etched on clear glass (for measuring on light-colored workpieces) and white etched on black glass (for measuring on dark workpieces). The operator chooses whichever gives the best contrast against the workpiece:

  • Measuring on printed paper: Black scale on clear glass (scale stands out against a light background).
  • Measuring on black metal: White scale (scale stands out against a dark background).
  • Measuring on PCB (green): Either can be used — the operator chooses by preference.

Being able to switch between black and white scale for the same measurement is a subtle but significant advantage over measuring loupes with a fixed scale.

Compatibility with Peak Loupe 1983 accessories

Since the KIMAG-10’s optics are based on the Peak Loupe 1983, accessories from the 1983 series can be used: carrying case, neck strap, eyecup extension, magnetic mounts for fixture mounting. This is a practical advantage for workshops that already have the Peak system.

Calibration certificate: S-9183-PP can be purchased separately for individual verification of the loupe’s optics and scale graduation accuracy. Standard for workshops with ISO 9001 requirements.

Where a multi-scale loupe makes a real difference

Workshop QC station: Standard workstation where the operator measures many different types of parameters on the same workpiece.

Prototype development: R&D labs where measurements require flexibility.

Antique and restoration workshops: Where both mm and inches may occur from different eras.

Schools and vocational training: ONE loupe per student instead of several.

Field technicians: Backpack equipment must be compact and flexible.

Construction and building inspection: Drawings with both metric and imperial dimensions.

Graphic design and printing industry: Where mm, point, and pica are all used.

Photo and film archives: Film frame graduation + color verification.

What you get for your money

KIMAG-10 measuring loupe, 10× magnification, achromatic optics (four elements in two groups), anti-reflective coating, LED ring with 8 LEDs for lighting in dark environments, focusable, 30 mm working distance, 9 interchangeable reticle scales included, compatible with 28 additional scales for special applications, compatible with Peak Loupe 1983 accessories, optional calibration certificate S-9183-PP. 1,480 SEK.

Compared to 9 separate Peak measuring loupes with different scales (~1,000 SEK per loupe = 9,000 SEK total), the KIMAG-10 offers a 6× cost saving. Compared to the Peak Loupe 1983 without LED (~600 SEK), the price difference is 900 SEK for LED lighting + 8 extra scales. For a workshop measuring different parameters daily, it’s an obvious economic choice.

Read more: KIMAG-10 measuring loupe with LED and 9 scales in the shop →

More news

All news