Published 16 October 2026 at 02:34
There is a common situation in maintenance work: a glycol circuit has been topped up several times over the years, sometimes with water, sometimes with a mixture from a canister that nobody really remembers. No one knows the freezing point of the system any more. It is usually discovered only when a cold night reaches a poorly insulated pipe, or when a heat exchanger starts behaving strangely.
What the instrument is
The Palm Abbe is a handheld digital refractometer designed for propylene glycol. You place one or two drops of the fluid in the stainless steel sample well, press a button and read the result on a backlit LCD display. This version shows the freezing point in degrees Celsius, with a measuring range from 0 to -51 °C. There is also a scale for concentration in volume percent, 0 to 100% with 0.1% resolution.
What problems it solves
Analogue refractometers require you to interpret where a borderline crosses a small scale. Two people can read different values from the same sample. Here the subjective interpretation disappears, because the value is shown as digits. Temperature compensation is automatic for liquids between 0 and 50 °C, so you do not have to wait until the sample has reached room temperature. Calibration is done against water, without special calibration solutions. The user interface has only two buttons.
When and why it is used
Measurement is carried out at commissioning, when topping up, at the start of the season and as a periodic check. In practice it is a faster and more reliable alternative to guessing based on the mixing ratio used when topping up, since a system rarely has exactly the mixture you think it has.
Three use cases
Food production. Secondary cooling circuits in dairies, breweries and slaughterhouses are often filled with propylene glycol. The maintenance technician takes a sample from the circuit and immediately sees whether the freezing point is still at the level the process requires.
Property and installation. In heat pumps, solar thermal systems and frost-protected heating circuits, the installer checks the fluid after installation and during service, without sending samples to a laboratory.
Field service. Because the instrument is small and battery-powered, the service technician can bring it in the toolbag and check several installations on the same day.
Why it pays off
A mixture that is too weak risks frost damage, which is expensive both in repairs and in production stoppages. A mixture that is too strong means unnecessarily expensive glycol and poorer heat transfer, since glycol conducts heat less well than water and also gives higher viscosity and greater pump load. Measuring instead of guessing is therefore cheaper than adjusting afterwards. The measurement takes seconds, and a single avoided frost damage usually exceeds the price of the instrument.
If you want a reliable basis for checking the glycol in your installation, you can read more about the instrument at our shop.