Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in seconds
Item number 64-907231

Measuring instrument with analog dial indicator for internal measurement, 10-18 mm

1.568 SEK

In stock

Precision instrument for accurate internal measurement in the 10-18 mm range. Ideal for workshops, the manufacturing industry, and quality control where exact dimensions are critical. Made from durable material for long-term use and reliable measurement results.

Request a quote 64-907231

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Description

Internal measuring instrument, measuring range 10 – 18 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — one fixed reference and one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 10 – 18 mm
  • Two-point opposing-contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 10 – 18 mm
Measuring principle Two-point opposing-contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907231

Compatible accessories

A dial indicator (matched to the desired resolution — typically 0.001 or 0.01 mm) is required for use and is sold separately. Setting rings within 10 – 18 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 0,424 kg
Specification

Internal measuring instrument, measuring range 10 – 18 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — one fixed reference and one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 10 – 18 mm
  • Two-point opposing-contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 10 – 18 mm
Measuring principle Two-point opposing-contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907231

Compatible accessories

A dial indicator (matched to the desired resolution — typically 0.001 or 0.01 mm) is required for use and is sold separately. Setting rings within 10 – 18 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *