Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Lagret lät bra på torsdagen och havererade på måndagen: så gör loggade vibrationsvärden slitaget synligtGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Lagret lät bra på torsdagen och havererade på måndagen: så gör loggade vibrationsvärden slitaget synligtGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors Remove
Item number 64-907235

Measuring instrument with analog dial indicator for internal measurement, 50-160 mm

1.229 SEK

In stock

A precise measuring instrument for internal measurements in the range of 50-160 mm. This tool is perfect for accurate dimensional measurement in workshops and production environments. Ideal for quality control and technical precision work where exact internal measurements are required.

Request a quote 64-907235

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Description

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 1,087 kg
Specification

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *