Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in seconds
Item number 85-RL-100-1

Precision steel ruler with 100 mm measuring length and a magnifier

2.518 SEK

In stock

Request a quote 85-RL-100-1

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Description

Measuring larger distances with a magnifier is limited by the length of the scales and is only possible to a limited extent. For quick and easy determination of lengths and distances, the RL precision steel measuring rulers are an ideal complement.

They are available in four lengths: 100 mm, 212 mm, 300 mm, and 400 mm, with one or two magnifiers (Crack magnifier RL-10 without scale) and are delivered in a carrying case. The magnifier moves on a guide rail mounted on the scale. When measuring length and distance, it must be ensured that the scale is placed parallel to the material to avoid measurement errors. Standard steel RL, with an accuracy of ± 0.02 mm. Test protocols are available for purchase as an accessory.

The four standard lengths of the precision steel measuring ruler are available with one or two magnifiers with 10x magnification. In addition, both versions are available as separate models with LED lighting.

Note that when using two magnifiers, the distance from center to center of the magnifiers is approximately 32 mm from the lowest readable value.

Factory calibration certificate (300 and 400 mm and 212 mm) or DAkkS (100). The delivery time is then extended by approximately two weeks.

For installation, we offer four metal standards according to order number RL-OA as a plain standard without magnifying glasses or other superstructures.

Technical data for metal standards RL:

  • Measuring scale: Graduation = 0.1 mm, marked 0 10 20 … (mm)
  • The graduations and numbers for stainless steel are laser-engraved.
  • Length precision ± 0.02 mm over the entire measuring length (at 20 degrees Celsius)
  • Thermal expansion coefficient: 0% per =% RLF
  • Material = 1-4301
  • Scale not centered on average – centered on metal body
  • Length of metal body:
  • 100 mm = total length 150 mm (+ 0.2 mm)
  • 212 mm = total length 262 mm (+ 0.2 mm)
  • 300 mm = total length 350 mm (+ 0.2 mm)
  • 400 mm = total length 450 mm (+ 0.2 mm)
  • Width of metal body = 19.6 mm (DIN 7168 medium)
  • Thickness of metal body = 2.0 mm (DIN 7168 medium)
Specification

Measuring larger distances with a magnifier is limited by the length of the scales and is only possible to a limited extent. For quick and easy determination of lengths and distances, the RL precision steel measuring rulers are an ideal complement.

They are available in four lengths: 100 mm, 212 mm, 300 mm, and 400 mm, with one or two magnifiers (Crack magnifier RL-10 without scale) and are delivered in a carrying case. The magnifier moves on a guide rail mounted on the scale. When measuring length and distance, it must be ensured that the scale is placed parallel to the material to avoid measurement errors. Standard steel RL, with an accuracy of ± 0.02 mm. Test protocols are available for purchase as an accessory.

The four standard lengths of the precision steel measuring ruler are available with one or two magnifiers with 10x magnification. In addition, both versions are available as separate models with LED lighting.

Note that when using two magnifiers, the distance from center to center of the magnifiers is approximately 32 mm from the lowest readable value.

Factory calibration certificate (300 and 400 mm and 212 mm) or DAkkS (100). The delivery time is then extended by approximately two weeks.

For installation, we offer four metal standards according to order number RL-OA as a plain standard without magnifying glasses or other superstructures.

Technical data for metal standards RL:

  • Measuring scale: Graduation = 0.1 mm, marked 0 10 20 … (mm)
  • The graduations and numbers for stainless steel are laser-engraved.
  • Length precision ± 0.02 mm over the entire measuring length (at 20 degrees Celsius)
  • Thermal expansion coefficient: 0% per =% RLF
  • Material = 1-4301
  • Scale not centered on average – centered on metal body
  • Length of metal body:
  • 100 mm = total length 150 mm (+ 0.2 mm)
  • 212 mm = total length 262 mm (+ 0.2 mm)
  • 300 mm = total length 350 mm (+ 0.2 mm)
  • 400 mm = total length 450 mm (+ 0.2 mm)
  • Width of metal body = 19.6 mm (DIN 7168 medium)
  • Thickness of metal body = 2.0 mm (DIN 7168 medium)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *