Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frostTemperature and humidity in the warehouse can be monitored without anyone going there to take readingsVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frostTemperature and humidity in the warehouse can be monitored without anyone going there to take readings
Item number 82-1999

Measuring Loupe, Peak Lupe 1999. Magnification 7x

2.499 SEK

In stock
Request a quote 82-1999

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Other models in the series 8

Description

82-1999 Magnifying Glasses & Loupes > Loupes with measuring capability

The optical system used in this loupe is not conventional, but rather ”telecentric,” which means that a small aperture at the focal point of the lens system allows for the measurement of three-dimensional objects such as spheres and cylinders, in addition to the length and width of flat objects, without parallax error. The telecentric Peak Loupe measuring loupe 1999 is essentially equivalent to an expensive profile projector. The lens system, consisting of three elements in two groups, has been specifically developed for these purposes.

Magnification 7 x
Focusable Yes
Field of view 20 mm.
Working distance 20 mm.
Scale 0.1 mm.
Optical properties Telecentric,
distortion-free
Size 38 x 74 mm
Weight 73 grams
Packaging Included
Standard scale Included as standard

 

To use this loupe, the distance between the scale and the lens system must first be adjusted by turning a knurled outer tube until the scale is clearly visible through the aperture with the largest diameter (3 mm), which can be adjusted using the rotating ring on the tip of the loupe. Then, place the loupe on the object to be measured so that the measuring scale is in contact with it, and read the length on the scale. This scale is divided into increments of 0.1 mm over a length of 20 mm, allowing the length of an object to be read with an error of less than 0.03 mm. When measuring three-dimensional objects, the aperture should be set to the smallest diameter (1 mm) or, preferably, use one with a 0.5 mm wide slit. The slit should be perpendicular to the line whose length is to be measured. Even in this case, parts of the object not in contact with the scale may appear blurred because they are not perfectly focused. No errors will occur when measuring length as long as the center distance between the unfocused images is measured, since the reduced brightness in the images resulting from the small aperture is compensated by the higher illumination of the object, which is a characteristic of the telecentric system.

 

Additional information
Product Type

Measuring scale

Magnification Range

Specification

82-1999 Magnifying Glasses & Loupes > Loupes with measuring capability

The optical system used in this loupe is not conventional, but rather ”telecentric,” which means that a small aperture at the focal point of the lens system allows for the measurement of three-dimensional objects such as spheres and cylinders, in addition to the length and width of flat objects, without parallax error. The telecentric Peak Loupe measuring loupe 1999 is essentially equivalent to an expensive profile projector. The lens system, consisting of three elements in two groups, has been specifically developed for these purposes.

Magnification 7 x
Focusable Yes
Field of view 20 mm.
Working distance 20 mm.
Scale 0.1 mm.
Optical properties Telecentric,
distortion-free
Size 38 x 74 mm
Weight 73 grams
Packaging Included
Standard scale Included as standard

 

To use this loupe, the distance between the scale and the lens system must first be adjusted by turning a knurled outer tube until the scale is clearly visible through the aperture with the largest diameter (3 mm), which can be adjusted using the rotating ring on the tip of the loupe. Then, place the loupe on the object to be measured so that the measuring scale is in contact with it, and read the length on the scale. This scale is divided into increments of 0.1 mm over a length of 20 mm, allowing the length of an object to be read with an error of less than 0.03 mm. When measuring three-dimensional objects, the aperture should be set to the smallest diameter (1 mm) or, preferably, use one with a 0.5 mm wide slit. The slit should be perpendicular to the line whose length is to be measured. Even in this case, parts of the object not in contact with the scale may appear blurred because they are not perfectly focused. No errors will occur when measuring length as long as the center distance between the unfocused images is measured, since the reduced brightness in the images resulting from the small aperture is compensated by the higher illumination of the object, which is a characteristic of the telecentric system.

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *