Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frostTemperature and humidity in the warehouse can be monitored without anyone going there to take readingsVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveFrom ”it looks like a crack” to a measured and documented dimension on screenAntifreeze protection in the cooling system can look right and still be wrong: how to measure glycol content and freezing point in secondsHow to know that the glycol in your cooling circuit actually protects against frostTemperature and humidity in the warehouse can be monitored without anyone going there to take readings
Item number 52-PA202X-061-062

Palm Abbe Digital Refractometer for Brake Fluid (DOT3): % Moisture Content & Boiling Point °F

5.763 SEK

In stock

Fahrenheit model – The MISCO Palm Abbe brake fluid refractometer is a digital precision instrument for measuring moisture content and calculating the boiling point of DOT3 brake fluid. It takes only two drops of brake fluid to obtain an accurate indication of moisture content or boiling point in just a few seconds. Brake fluid can be measured from the master cylinder or from each wheel cylinder.

Request a quote 52-PA202X-061-062

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Description
Scale Medium Unit of Measurement Display Shows Measuring Range Resolution Accuracy
061 Brake Fluid – DOT3 % Water DOT3 % H2O 0 to 6 0.1 0.5
062 Brake Fluid – DOT3 Boiling Point °F DOT3 Boil °F 244 to 485 1 10

MISCO DOT3 Brake Fluid Tester – Measures brake fluid moisture content and estimates boiling point

The Misco Palm Abbe Digital brake fluid refractometer is a fourth-generation digital refractometer designed for the direct measurement of moisture content and calculation of the boiling point of Standard DOT3 brake fluid. It requires only one or two drops of brake fluid to provide an immediate, accurate reading of water percentage and an estimate of the boiling point.

As part of regular maintenance intervals, many vehicle manufacturers recommend periodic brake fluid inspections. However, there was never an easy, affordable way to test it, until now. A brake fluid refractometer represents the most accurate field testing instrument available for determining moisture content and calculating the boiling point of automotive brake fluids.

No Brakes – The dangers of high moisture content in brake fluid:


A dangerous condition exists when the brake fluid boils within the brake system; this can feel like trapped air in the lines when braking. In extreme cases, the driver may be able to press the brake pedal all the way to the floor without slowing or stopping the vehicle. In colder climates, brake fluid with high moisture content becomes very viscous, which can also cause slow response or difficulty in braking. Furthermore, as the water content in the brake fluid increases, it becomes more corrosive to steel pistons and the ABS modulator.

Easy to use:

Place a drop of brake fluid from the master cylinder or wheel cylinder on the measuring surface, near the sample cover, allow a short period for the temperature to stabilize, and press the button.

Even new cars contain water in their brake fluid!


It is well known that automotive brake fluid is “hygroscopic.” This means that within a relatively short period, brake fluid absorbs moisture directly from the air, even in a sealed system.

The Society of Automotive Engineers (SAE) conducted a recent study of automotive brake fluid. They found that an average one-year-old car had 2% moisture in its brake fluid. Randomly tested cars in the U.S., with an average age of eight years, showed an average water content of greater than 2 ½%. Of these cars, 25% had a dangerously high water content of 4% or more.

The result is catastrophic brake failure!


Brake fluid with high water content has a reduced boiling point. This means that the brake fluid will boil in the wheel cylinder at a lower temperature than the brake system was designed for. When driving down a steep slope, towing a trailer, or if a brake pad sticks to a rotor, the brake fluid temperature can rise high enough to boil if it contains sufficient water. Pressing the brake pedal will now only compress the vapor instead of the pad – the result is sudden brake failure.

Brake fluid is a dirty little secret:


DOT Standard 116 requires that DOT3 brake fluid, with no moisture content, will only boil at temperatures above 400 °F (205 °C). The fluid in a 3-4 year old car with 3-4% water content in the brake fluid could boil at less than 300 °F (149 °C). How much water is too much? When should brake fluid be changed? Click here for a handy guide to brake fluid water content: When should brake fluid be changed?

Specification
Scale Medium Unit of Measurement Display Shows Measuring Range Resolution Accuracy
061 Brake Fluid – DOT3 % Water DOT3 % H2O 0 to 6 0.1 0.5
062 Brake Fluid – DOT3 Boiling Point °F DOT3 Boil °F 244 to 485 1 10

MISCO DOT3 Brake Fluid Tester – Measures brake fluid moisture content and estimates boiling point

The Misco Palm Abbe Digital brake fluid refractometer is a fourth-generation digital refractometer designed for the direct measurement of moisture content and calculation of the boiling point of Standard DOT3 brake fluid. It requires only one or two drops of brake fluid to provide an immediate, accurate reading of water percentage and an estimate of the boiling point.

As part of regular maintenance intervals, many vehicle manufacturers recommend periodic brake fluid inspections. However, there was never an easy, affordable way to test it, until now. A brake fluid refractometer represents the most accurate field testing instrument available for determining moisture content and calculating the boiling point of automotive brake fluids.

No Brakes – The dangers of high moisture content in brake fluid:


A dangerous condition exists when the brake fluid boils within the brake system; this can feel like trapped air in the lines when braking. In extreme cases, the driver may be able to press the brake pedal all the way to the floor without slowing or stopping the vehicle. In colder climates, brake fluid with high moisture content becomes very viscous, which can also cause slow response or difficulty in braking. Furthermore, as the water content in the brake fluid increases, it becomes more corrosive to steel pistons and the ABS modulator.

Easy to use:

Place a drop of brake fluid from the master cylinder or wheel cylinder on the measuring surface, near the sample cover, allow a short period for the temperature to stabilize, and press the button.

Even new cars contain water in their brake fluid!


It is well known that automotive brake fluid is “hygroscopic.” This means that within a relatively short period, brake fluid absorbs moisture directly from the air, even in a sealed system.

The Society of Automotive Engineers (SAE) conducted a recent study of automotive brake fluid. They found that an average one-year-old car had 2% moisture in its brake fluid. Randomly tested cars in the U.S., with an average age of eight years, showed an average water content of greater than 2 ½%. Of these cars, 25% had a dangerously high water content of 4% or more.

The result is catastrophic brake failure!


Brake fluid with high water content has a reduced boiling point. This means that the brake fluid will boil in the wheel cylinder at a lower temperature than the brake system was designed for. When driving down a steep slope, towing a trailer, or if a brake pad sticks to a rotor, the brake fluid temperature can rise high enough to boil if it contains sufficient water. Pressing the brake pedal will now only compress the vapor instead of the pad – the result is sudden brake failure.

Brake fluid is a dirty little secret:


DOT Standard 116 requires that DOT3 brake fluid, with no moisture content, will only boil at temperatures above 400 °F (205 °C). The fluid in a 3-4 year old car with 3-4% water content in the brake fluid could boil at less than 300 °F (149 °C). How much water is too much? When should brake fluid be changed? Click here for a handy guide to brake fluid water content: When should brake fluid be changed?

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *