Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors Remove
Item number 64-830008

Setting ring according to DIN 2250 form C, 2.8 mm, size indication to three decimal places

2.651 SEK

In stock

Setting ring with a 2.8 mm diameter for precise calibration of measuring instruments. A precision-manufactured component that ensures accurate measurement results during quality control and manufacturing. Ideal for workshops, laboratories, and industrial environments where exact measurements are critical for quality assurance.

Request a quote 64-830008

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and gauges for professionals
  • Call us +46 8 753 00 04

Category:

Description

Select Setting Ring, ø2.8 mm, DIN 2250 form C, Class 1 to 4mm is a precision hole master ring used as a zero reference for internal measuring instruments — three-point internal micrometers (Mitutoyo Holtest, TESA Imicro, Mitutoyo Borematic) and hole gauges that require a known-diameter master for calibration.

DIN 2250 form C is the ring-type variant of the gauge block standard family. The Form C designation distinguishes the design from Form A and Form B; Form C is the standard inspection bench configuration.

The accuracy specification ”Class 1 to 4mm” is the tolerance band declared by the manufacturer. Hardened steel construction: the ID surface is precision ground after heat treatment.

Common applications: zero-setting reference for three-point internal micrometers, calibration master for hole gauges with dial indicators, periodic accuracy verification of internal measuring instruments. Combine with Mitutoyo gauge block maintenance kit (item 64-516650).

Features

  • Select Setting Ring, ø2.8 mm
  • DIN 2250 form C — standard inspection bench configuration
  • Accuracy: Class 1 to 4mm
  • Precision ground internal diameter
  • Hardened steel — long-life calibration reference
  • Zero reference for internal measuring instruments

Specifications

Type Setting Ring (DIN 2250 form C)
Diameter ø2.8 mm
Accuracy Class 1 to 4mm
Standard DIN 2250 form C
Item Number 64-830008

Compatible Accessories

Mitutoyo gauge block maintenance kit (item 64-516650). Mitutoyo Holtest, TESA Imicro and Mitutoyo Borematic internal micrometers.

Additional information
Weight 0,014 kg
Specification

Select Setting Ring, ø2.8 mm, DIN 2250 form C, Class 1 to 4mm is a precision hole master ring used as a zero reference for internal measuring instruments — three-point internal micrometers (Mitutoyo Holtest, TESA Imicro, Mitutoyo Borematic) and hole gauges that require a known-diameter master for calibration.

DIN 2250 form C is the ring-type variant of the gauge block standard family. The Form C designation distinguishes the design from Form A and Form B; Form C is the standard inspection bench configuration.

The accuracy specification ”Class 1 to 4mm” is the tolerance band declared by the manufacturer. Hardened steel construction: the ID surface is precision ground after heat treatment.

Common applications: zero-setting reference for three-point internal micrometers, calibration master for hole gauges with dial indicators, periodic accuracy verification of internal measuring instruments. Combine with Mitutoyo gauge block maintenance kit (item 64-516650).

Features

  • Select Setting Ring, ø2.8 mm
  • DIN 2250 form C — standard inspection bench configuration
  • Accuracy: Class 1 to 4mm
  • Precision ground internal diameter
  • Hardened steel — long-life calibration reference
  • Zero reference for internal measuring instruments

Specifications

Type Setting Ring (DIN 2250 form C)
Diameter ø2.8 mm
Accuracy Class 1 to 4mm
Standard DIN 2250 form C
Item Number 64-830008

Compatible Accessories

Mitutoyo gauge block maintenance kit (item 64-516650). Mitutoyo Holtest, TESA Imicro and Mitutoyo Borematic internal micrometers.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *