Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors RemoveVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The bearing sounded fine on Thursday and failed on Monday: how logged vibration values make wear visibleGhost voltage that disappears when the meter loads the circuit: how to tell real voltage from falseThree seconds and the right viewing angle: how temperature checks actually get doneWhy a Vernier Caliper Shows a Different Depth Every Time and What a Depth Micrometer Does DifferentlyA bore can hold size at one point and still be both tapered and ovalThe temperature was right when the load was loaded, but what happened during transport?With a 0.4-second temperature reading, you can measure accurately before the product has had time to changeCore temperature is what counts: how to document cooling and heating processes without handwritten listsThe cold chain failed overnight, but nobody can prove when or for how longUsing the Same Thermometer for Raw and Cooked Meat Is a Risk That Two Colors Remove

Schut Gauge Block Set M112 Grade 0 (112 Steel Blocks ISO 3650/0): How 4 Wrung Blocks Build an 87.543 mm Reference Dimension with 0.15 µm Total Accuracy

Published July 8, 2026 at 17:38

Gauge blocks (length standards, Johansson blocks) are perhaps the single most important tool in precision metrology. The concept is simple but the implications far-reaching: rectangular steel blocks with precision-ground parallel faces of a known dimension. By combining several blocks together (”wringing” them), a total stack is created whose overall length is the sum of the individual dimensions. Because a stack of blocks behaves as if it were a single block, any desired reference dimension can be built from a relatively small number of blocks — and thereby used to calibrate measuring instruments, to verify workpieces, and to serve as a physical reference in accuracy-critical applications.

What the Schut M112 gauge block set is

Steel gauge block set M112, grade 0, ISO 3650, hardness 63-65 HRC (art. 906.629) from Schut ECONOMY LINE is a complete gauge block set in the strictest commercially available tolerance. The set includes:

  • 112 individual gauge blocks in grade 0.
  • Blocks from 1.005 mm up to 100 mm in standardized steps.
  • Hardened steel with hardness 63-65 HRC (tool steel, wear-resistant).
  • Cross-section 30.9 × 9 mm for blocks 0.5-10 mm.
  • Cross-section 35.9 × 10 mm for blocks 10-100 mm.
  • Coefficient of expansion (11.5±1) × 10⁻⁶ /°C (standard tool steel).
  • Supplied in a wooden case with the manufacturer’s measurement protocol.
  • Compatible with ISO 17025 calibration certificates.

Basic specifications:

  • Manufacturer: Schut (Germany)
  • Series: ECONOMY LINE
  • Number of blocks: 112
  • Grade: 0 (ISO 3650/0)
  • Hardness: 63-65 HRC
  • Coefficient of expansion: (11.5 ± 1) × 10⁻⁶ /°C
  • Cross-section (0.5-10 mm): 30.9 × 9 mm
  • Cross-section (10-100 mm): 35.9 × 10 mm
  • Delivery: Wooden case with the manufacturer’s measurement protocol
  • Compatible: ISO 17025 calibration certificates
  • Item number: 64-906629

Schut ECONOMY LINE gauge block set M112 grade 0, 112 steel blocks in a wooden case

The ISO 3650 grade system

The international standard ISO 3650 defines tolerance grades for gauge blocks:

  • Grade K: The calibration standard level for national laboratories. Tolerance ±(0.20 + 0.004 × L/mm) µm.
  • Grade 0: Calibration laboratory reference. Tolerance ±(0.12 + 0.002 × L/mm) µm.
  • Grade 1: Workshop calibration master. Tolerance ±(0.20 + 0.004 × L/mm) µm.
  • Grade 2: Workshop reference. Tolerance ±(0.45 + 0.008 × L/mm) µm.

Practical implications for a 25 mm block:

  • Grade 0: 0.12 + 0.002×25 = 0.17 µm.
  • Grade 1: 0.20 + 0.004×25 = 0.30 µm.
  • Grade 2: 0.45 + 0.008×25 = 0.65 µm.

Grade 0 is roughly twice as accurate as grade 1 and 3-4 times more accurate than grade 2. At the same price scale, grade 0 is typically 2-3× more expensive than grade 2.

What ”wringing” means

Wringing is the fundamental technique that makes gauge block stacking possible:

  1. Two gauge blocks with clean, flat surfaces are placed on top of each other.
  2. Through a sliding motion and light pressure, they are joined.
  3. The surface molecules are brought into such close contact that van der Waals forces take over.
  4. The blocks’ surfaces ”adhere” and become a single unit — without oil, without glue, without screws.
  5. Residual air gap: typically < 25 nm (microscopically thin).

The total dimension of a wrung stack is the sum of the individual dimensions, with a negligible contribution from the air gap. A 4-block stack with blocks of 20 + 5 + 2 + 0.5 mm gives 27.500 mm ±0.4 µm (grade 0 total error).

Practical stacking for an 87.543 mm reference

Systematic method for building a spec dimension:

  1. Start with the smallest blocks. For 87.543 mm, choose blocks that account for the last digits.
  2. The 1 mm step is taken out last: 87.543 → 87.540 mm after subtracting 0.003 mm.
  3. The 0.001 mm step is 1.003 mm (from the ”1.001-1.009 mm” series’ 1.003 mm block).
  4. Remaining: 87.540 – 1.003 = 86.537 mm. Alternative breakdowns are possible; there are typically several solutions.
  5. 0.01 mm step: 1.04 mm block. Remaining: 86.537 – 1.04 = 85.497 mm. This doesn’t work — 85.497 is odd.
  6. The optimal solution is usually: 87.543 = 1.003 + 1.54 + 5 + 80 mm. 4 blocks.

The final stack is assembled, wrung together, and the total dimension is 87.543 mm ±0.4 µm (for a grade 0 4-block stack).

What the M112 set contains (typical distribution)

  • 1 pc: 1.0005 mm (calibration reference)
  • 9 pcs: 1.001-1.009 mm in 0.001 mm steps
  • 49 pcs: 1.01-1.49 mm in 0.01 mm steps
  • 49 pcs: 0.5, 1.0, 1.5, … 24.5 mm in 0.5 mm steps
  • 4 pcs: 25, 50, 75, 100 mm

A total of 112 blocks covering every possible dimension to micron accuracy. Alternative set sizes: M47 (47 blocks for a smaller range), M32 (32 blocks, budget), M87 (mid-range set).

Gauge block care — critical routines

Gauge block surfaces are extremely sensitive. A single scratch permanently ruins the grade 0 tolerance spec.

  • Never rub against another hard surface: Dust particles between a gauge block and a surface create scratches instantly.
  • Clean only with pure alcohol and a lint-free cloth: Never coarse cloth or paper.
  • Wring only between clean surfaces: Dust between wrung blocks can damage both upon separation.
  • Oiling for storage: A thin layer of instrument oil after use to prevent corrosion.
  • Thermal stability: Use at 20 °C ±1 °C. For larger temperature deviations, recalculate using the coefficient of expansion.
  • Protected transport: Wooden case with individual slots. Never loose in a drawer.
  • Regular calibration verification: Every 3-5 years at an accredited laboratory for grade 0 verification.

Where a gauge block set makes a real difference

Calibration laboratories: Master reference for calibrating micrometers, calipers, dial indicators, CMM instruments.

Dimensional stacking for sine bars: Precision angle setting via the gauge block stack under the sine roller.

Wringing calibration of internal three-point micrometers: Setting ring alternative.

Quality laboratories in manufacturing industry: Statistical Process Control (SPC) with certified references.

Tooling production quality control: Verification of manufactured measuring instruments before delivery.

Metrology training: Technical training demonstration of fundamental dimensional concepts.

Workshop QC of critical dimensions: Tight tolerances (grade IT4-IT5) on precision components.

Repair verification of measuring equipment: After instrument servicing, verification against the gauge block stack.

Prototype and research laboratories: New measurement methods and instrument development.

National metrology institutes (SP in Sweden): Traceability chain for top-level references.

Thermal expansion in practical measurement

At the 20 °C reference temperature, the gauge block dimensions are nominal. At other temperatures:

Dimensional change = L × α × ΔT

For a 100 mm block at 25 °C (5 °C above standard):

100 × 11.5×10⁻⁶ × 5 = 0.0058 mm = 5.8 µm.

This is 30× larger than the grade 0 tolerance (0.17 µm). Consequence: gauge block measurements must be performed at 20 °C ±1 °C to preserve accuracy. Calibration laboratories typically have climate-controlled rooms at 20 °C ±0.1 °C.

What you get for the money

Schut ECONOMY LINE steel gauge block set M112 grade 0 (art. 906.629), 112 individual gauge blocks from 1.005 mm to 100 mm in standardized steps, grade 0 according to ISO 3650/0 (strictest commercially available tolerance), hardened steel 63-65 HRC, standardized cross-sections 30.9×9 mm (blocks 0.5-10 mm) and 35.9×10 mm (blocks 10-100 mm), coefficient of expansion (11.5±1)×10⁻⁶ /°C, supplied in a wooden case with individual slots and the manufacturer’s measurement protocol for each block, compatible with ISO 17025 calibration certificates.

11,725 kronor is the instrument investment. Compared to grade 2 (workshop reference, tolerance 3-4× lower), grade 0 typically costs 2-3× more but delivers the strictest tolerance grade commercially available — which is critical for calibration laboratories and for workshops verifying precision instruments. The investment is fundamental: a gauge block set lasts for decades with proper care.

Read more: Schut gauge block set M112 grade 0 in the shop →

More news

All news